• Bicycle Drive Chain Manufacturers Introduces The Requirements For The Use Of Different Chains


    Bicycle Drive Chain Manufacturers introduces the use of different chains:

    1. Rubber chain: This kind of chain is based on the A, B series stainless steel chain with a U-shaped attachment plate on the outer link, and rubber (such as natural rubber NR, silicone rubber SI, etc.) can increase wear and tear on the attached plate. Ability to reduce noise and increase shock resistance. Used for transportation.
    2. O-shaped sealing ring chain: An O-shaped sealing ring for sealing is installed between the inner and outer chain plates of the roller chain to prevent dust from entering and grease from flowing out of the hinge. The stainless steel chain is strictly pre-lubricated. Because the chain has parts and reliable lubrication, it can be used in open transmission such as motorcycles.
    3. Stainless steel chain: The material of the parts is stainless steel. This kind of chain is suitable for use in the food industry and occasions that are susceptible to corrosion by chemicals and drugs, and can also be used in high and low temperature occasions.


    https://www.hzqjchain.com/
    China Motorcycle Drive Industrial Chain,Sprocket Manufacturer
    Hangzhou Qianjiang Chain Industry Co., Ltd. is a professional manufacturer of drive chain, motorcycle chain, industrial chain, industrial sprocket. The product fully complies with international standardization.
    WWW.HZQJCHAIN.COM
    0 0 Comments 0 Shares
  • Silent Chain Cleaning Tips
    The normal operation of Silent Chain relies on the usual maintenance and protection of the chain. For the chain that needs to be cleaned, it is recommended that you can use metal powder, which can easily clean the oil on the chain, without irritating odor, and please be very safe. After each cleaning and washing, you need to lubricate the chain. Insufficient chain lubrication will increase...
    0 0 Comments 0 Shares
  • Silent Chain Usage Process
    Because of its specific functions, the Silent Chain has a different assembly method from other chains, creating the unique endurance and pulling force of the Silent Chain . And this kind of chain is used in various machinery in various industries such as agriculture, mining, metallurgy, petrochemical industry and lifting and transportation. For the chain, maintenance is required after a period...
    0 0 Comments 0 Shares
  • Agricultural Chain Manufacturers Introduce The Application Range Of Industrial Gears
    The stainless steel chain uses cycloid as the gear transmission of the tooth profile. The contact stress between the transmission tooth surfaces is small, the wear resistance is good, and there is no undercutting phenomenon, but the manufacturing accuracy is high, and it is very sensitive to the center distance error. Jiangsu chain is only used in clocks and meters. Planetary gear transmission...
    0 0 Comments 0 Shares
  • Transmission Chain Repair Skills
    The Transmission Chain is a very critical transmission structure in mechanical equipment, which affects the working performance and service life of the equipment. Therefore, it is very necessary to maintain the chain at ordinary times. 1. The sprocket should be installed on the shaft without skew or swing. The end faces of the two sprockets in the same assembly should be in the same plane....
    0 0 Comments 0 Shares
  • Transmission Chain Manufacturers Introduce The Skills Of Maintaining The Chain
    If the conveyor chain is not maintained for a long time, it will cause problems such as increased failure rate and shortened service life. The daily maintenance of the conveyor chain is generally divided into primary maintenance and secondary maintenance. Here Transmission Chain Manufacturers will give you a specific introduction. 1. During the normal use of the conveyor chain, due to normal...
    0 0 Comments 0 Shares
  • Industrial Sprocket Manufacturer Introduces The Role Of Gears
    Industrial Sprocket manufacturer introduces gears as a common mechanical part in people's lives. The condition for continuous transmission is that the coincidence ratio must be greater than or equal to 1, which is the actual meshing line (segment) length, ratio, gear base pitch, and the ratio must be greater than or equal to 1. If the actual meshing line (the length of the base arc) is greater...
    0 0 Comments 0 Shares
  • Agricultural Chain Manufacturers Introduce The Strategy Of Chain Lubrication
    Agricultural Chain Manufacturers introduces the lubrication methods of transmission chains. There are usually four lubrication methods:

    ① Manually apply oil regularly with an oil can or brush;

    ②Drip oil lubrication, use the oil cup to drip oil to the gap between the inner and outer chain plates of the loose edge through the oil pipe;

    ③Oil bath lubrication or splash lubrication, using a sealed transmission box, the former part of the chain and sprocket is immersed in oil, the latter uses a larger diameter oil slinger to splash the oil;

    ④The oil pump is lubricated by pressure injection, and the oil pump is used to continuously supply oil to the chain through the oil pipe. The circulating oil can play the role of lubrication and cooling.

    The kinematic viscosity of lubricating oil used in the transmission chain is about 20-40mm2/s at operating temperature. Only where the speed is very slow and the oil cannot be supplied, grease can be used instead.

    The above content is organized and shared by Transmission Chain Manufacturers, hoping to help those in need.

    0 0 Comments 0 Shares
  • Maintenance Tips Of Conveyor Chain

    How to maintain Conveyor Chain :

    1. The tightness of the stainless steel conveyor chain should not be too tight or too loose, otherwise the conveyor chain will be damaged.
    2. The stainless steel conveyor chain should be kept clean, avoid sun and rain, and avoid contact with acids, alkalis, organic solvents, and other substances.
    3. If the conveyor chain is severely worn, new conveyor chains and other parts should be replaced to ensure good results and prolong its service life.
    4. When the chain is working, lubricating oil should be added to the chain in time to make the chain work more smoothly, faster, and reduce wear.
    5. The old conveyor chain cannot be mixed with the new conveyor chain. This can cause shocks and damage the conveyor chain.
    6. The time on the conveyor chain is not used there, and then it can be cleaned with diesel or kerosene, then coated with engine oil and placed in a dry place.

    The above content is organized and shared by Industrial Sprocket Manufacturers, hoping to help those in need.

    0 0 Comments 0 Shares
  • Agricultural Chain Supplier Introduces The Precautions For Cleaning The Chain

    The cleaning of high-strength stainless steel chains is also particular. If it is just a perfunctory cleaning, the damage will be greatly affected. Therefore, Agricultural Chain supplier introduced the following points when cleaning:
    1. Clean your high-strength chain after each use, especially in rainy and humid environments.
    2. Be careful to use a dry cloth to wipe the high-strength chain and its accessories. If necessary, use an old toothbrush to clean the gaps between the links. Also don't forget to clean the front derailleur and the rear shift guide wheels.
    3. Use a brush to remove the sand and dirt accumulated between the high-strength chains, if necessary, use warm soapy water to assist.
    4. Do not use strong acid or strong alkaline cleaning agents (such as rust remover), because these chemicals can cause damage or even breakage of the high-strength chain.
    5. Never use a chain washer with added solvents to clean high-strength chains. This cleaning method will definitely damage the high-strength chains.

    The above content is organized and shared by Transmission Chain manufacturer, hoping to help those in need.

    0 0 Comments 0 Shares
More Stories